Part NumberGS-065-008-1-L
Design Note
Spice Models
Step File
Allegro Library
Altium Library
Evaluation BoardsComing soon
RDS(on)225 mΩ
QG1.5 nC
Dimensions (mm)5.0 x 6.0 x 0.85
TR QTY3000
MR Size12 mm x 7″
TR Size12 mm x 13″


650V Enhancement Mode GaN Transistor

The GS-065-008-1-L is an enhancement mode GaN-on-Silicon power transistor. The properties of GaN allow for high current, high voltage breakdown and high switching frequency. GaN Systems implements patented Island Technology® cell layout for high-current die performance & yield.  The GS-065-008-1-L is a bottom-side cooled transistor in a 5×6 mm PDFN package that offers low junction-to-case thermal resistance.  These features combine to provide very high efficiency power switching.

  • Ultra-low FOM Island Technology® die
  • Small 5×6 mm PDFN package
  • Easy gate drive requirements (0 V to 6 V)
  • Transient tolerant gate drive (-20 V / +10 V )
  • Very high switching frequency (> 20 MHz)
  • Fast and controllable fall and rise times
  • Source Sense pad for optimized gate drive
  • Reverse current capability
  • Zero reverse recovery loss
  • RoHS 6 compliant


  • Power adapters
  • LED lighting drivers
  • Fast battery charging
  • LLC converters
  • Power Factor Correction
  • Appliance motor drives
  • Wireless power transfer
  • Industrial power supplies


EZDrive™ Open Loop Boost Evaluation Board

The GS65011-EVBEZ evaluation board allows the user to evaluate GaN Systems’ EZDrive™ circuit. EZDrive™ is a low-cost, easy way to implement a GaN driving circuit using a standard MOSFET controller with integrated driver. It is adaptable to any power level, any frequency, and any LLC and PFC controller.

EZDrive™ features and benefits

  • Low cost
  • Low component count
  • Smaller board area
  • Universally converts a Si MOSFET controller/driver to drive GaN Systems’ E-HEMTs
  • Eliminates the redundant GaN drivers & LDOs of a monolithic integrated drive GaN device
  • Controllable turn ON / OFF slew rate for optimizing EMI and efficiency
  • GaN E-HEMT footprint compatible with GS-065-004-1-L and GS-065-011-1-L